Wired Dance Floor Cleaning Method

LED Dance Floor will accumulate some dust and debris after the long-term operation, so how do we clean the Wired Dance Floor? Let's go and find the cleaning method and cleaning precautions. Regular cleaning and maintenance of the Wired Dance Floor can prolong the service life of the Wired Dance Floor and improve the quality of the Wired Dance Floor.

Here is the content list:

l Clean the surface of the Wired Dance Floor

l Dry Wired Dance Floor

l Precautions for cleaning Wired Dance Floor

Clean the surface of the Wired Dance Floor

Dusting is also blowing dust. Blow in the same direction, from left to right or right to left. Use a professional electric brush to remove dust or dirt from the surface of the Wired Dance Floor module. When cleaning, the pneumatic brush cleans evenly and evenly and can be cleaned repeatedly according to the degree of pollution and age or aging of the Wired Dance Floor. Then use a sprayer to spray the special cleaning solution on the surface for preliminary cleaning. For secondary dust removal, use a professional electric brush to clean the dust of the Wired Dance Floor module again. Note that the cleaning needs to replace the brush. In the secondary cleaning, the special cleaning liquid is sprayed onto the surface for cleaning again to remove the dust left by the secondary dust removal. According to the residual dirt on the surface of the Wired Dance Floor, the ratio of cleaning solution and water can be determined. If there is not much dirt, you can spray it with clean water. Keep spraying from top to bottom or right to left.

Dry Wired Dance Floor

Under normal circumstances, it can be air-dried naturally. For example, if the surface of the Wired Dance Floor is slow to dry, such as high humidity and low temperature, it needs to be dried. Then use the sprayer to spray the special repair fluid evenly on the surface of the Wired Dance Floor for surface repair. Then air-drying can be naturally air-dried under the conditions of temperature, humidity, wind speed, and suitable conditions. In the case of low temperature and high humidity, it can be dried with an air gun, and the air pressure is required to be below 3 kg.

Precautions for cleaning Wired Dance Floor

First and foremost, one should consider purchasing a good-quality cleaning kit. The cost of cleaning solution generally includes electrolytes, high-purity distilled water, antistatic solution, etc., which can effectively clean the dust and other stains on the Wired Dance Floor. Some friends think that water can also be used, and it will not affect the outdoor Wired Dance Floor. However, the cleaning effect of water is relatively poor, and the dust is easy to adhere to again after cleaning. At the same time, it should be noted that do not spray water on the but spray a little cleaning liquid on the cleaning cloth, and then wipe gently in the same direction. Wired Dance needs to be wiped down and unplugged from the floor before cleaning.

If you are interested in Wired Dance Floor, you can contact us, our website is https://www.sunfromlight.com/, you are welcome, and look forward to cooperating with you.