Installation of HD VIDEO FLOOR

The installation characteristics of HD VIDEO FLOOR are different from LED lights such as LED wall washer, LED projection light, LED point light source, etc., which requires more attention to the preparation work when installing HD VIDEO FLOOR. The lamp body of HD VIDEO FLOOR is made of high-purity aluminum alloy, the surface is electrostatically sprayed, cured at a constant temperature, and has strong adhesion. HD VIDEO FLOOR generally has good waterproof and dustproof performance. When most users know about HD Video Floor, they will also care about its installation method and requirements for the installation environment. Let's take a look at the installation method for the HD Video Floor.

Here is the content list:

• Pre-installation preparation for HD VIDEO FLOOR

• Installation of HD VIDEO FLOOR

Pre-installation preparation for HD VIDEO FLOOR

Because the thickness of the HD Video Floor is 13-17 cm, the installation environment will have certain requirements. Before installation, preparations should be made from several aspects: because it needs to be used on the ground, especially in some humid environments, water droplets often appear in the LED floor tile light, so it is necessary to improve the waterproof effect of the LED floor tile light. Therefore, please pay attention to some details when installing. Before installing the LED floor tile lights, the power must be cut off. This is the first step in the installation of all electrical equipment and the basis for safe operation. First, all parts of the lamp must be laid out. LED floor tiles are special landscape LED lights buried in the ground. Once installed, it is cumbersome to reinstall with fewer parts. Therefore, please prepare before installation. Dig a hole the same size as the LED floor tile light, then fix the embedded part with concrete. The embedded components play a role in isolating the body of the HD VIDEO FLOOR from the soil and can ensure the longevity of the HD VIDEO FLOOR. The power cord of the LED floor tile light requires a VDE-certified waterproof power cord to ensure the longevity of the LED floor tile light.

Installation of HD VIDEO FLOOR

Under normal circumstances, there are two installation methods for HD VIDEO FLOOR. One is to dig a foundation pit of about 15cm under the floor, and then install an HD VIDEO FLOOR in the foundation pit, and then carry out edging treatment. If it is installed outdoors, it must be installed in advance in there are ventilation and heat dissipation ports designed in the foundation pit, which can realize convection of the air and help the screen to dissipate heat as soon as possible, so there is no need to worry about the normal operation of the screen due to excessive heat. If the LED Dance Floor is installed on the floor tile floor upstairs, another installation method is required. The LED interactive floor tile screen is directly tiled on the ground, and components such as corners are not required. After the installation is completed, the edge of the floor tile screen is beveled. Edge treatment. In addition, the module of the interactive floor tile screen adopts a closed kit, which can avoid the oxidation and corrosion of each device due to long-term contact with the air, and play a role in prolonging the service life of the device.

For more HD VIDEO FLOOR-related questions, please contact us. Years of accumulated R&D and production experience, to provide you with more product services and technical support! Our official website is https://www.sunfromlight.com/.